COASO iCuejet 370 Digital UV Coater + gold foiling
Product Specification
|
Inkjet Technology |
COASO Inkjet technology. On demand Piezo Printing technique. |
|
Registration |
Feeding by vacuum on the side, double CCD camera for accurate positioning |
|
File Format |
PDF/Tiff |
|
Print Width |
330 mm /13 in |
|
Print Accuracy |
±0.2 mm / ±0.008 in (Both X&Y direction) |
|
Print Thickness |
20-80 µm |
|
Print speed (pages per minute) |
36PPM (A3 297x420mm/20µm) |
|
Ink Supply method |
Industrial re-circulation ink supply system, no purge needed during printing |
|
Substrate Size |
Width:279-370 mm; Length: 210-750 mm, Width:10.98-14.57 in; Length: 8.27-29.53 in |
|
Substrate range |
110-400 gsm, conventional offset or digitally printed stock with lamination is preferred |
|
Paper Feeder Capacity |
Max 500 mm / 19.7 in |
|
Ink Type |
UV Clear Ink |
|
Average Ink Usage |
20ml/m2, Thickness 20µm 0.6763 us fl oz/10.764 sq. ft; (0.0628 us fl oz/1 sq. ft) |
|
Foil size |
The inner winding diameter is 76.2mm/ 3 inches. The Max foil diameter 350mm/ 13.7 inches |
|
|
|
|
Press Dimensions (L x W x H) |
4700 x 1000 x 1700 mm / 185 x 39.7 x 67 in |
|
Press Station Weight (net)* |
1750 kg / 3858 lbs |
|
Configuration |
|
|
Module Components |
Feeder Unit, Printing Platform, Positioning Unit, vanishing unit, cleaning unit, Inking unit, Curing unit, Print Engine Module, image workstation, PSU module, device specific controller. |
|
Consumables |
UV ink, foiling film, Filter, cleaning solution, Non-woven fabric |
|
Power Requirement |
Three phase 380v-12KW |
|
Gas Source Requirement |
Clean air without oil and water 6 bar/87 psi |
|
Gas Source Consumption |
15 L/min |
|
Environment Requirement |
Temperature 20-30° Celsius, relative humidity 30-50% (no condensation) |
* Weight varies depending on configuration;
Spec is subjected to change from time to time to meet requirement, distributor should contact Compose for confirmation.
Following is a general comment from the Research department on Ink usage:
1. Average Ink Usage per square meter; 20ml/m2, Thickness 20µm
2. Varnish thickness can be varied between 20µm to 80µm in 4 intervals. The thicker it is, the more stand out is the 3D effect.
* Weight varies depending on configuration;
Spec is subjected to change from time to time to meet requirement, distributor should contact Compose for confirmation.
Following is a general comment from the Research department on Ink usage:
- Average Ink Usage per square meter
20ml/m2, Thickness 20µm
- Varnish thickness can be varied between 20µm to 80µm in 8 intervals. The thicker it is, the more stand out is the 3D effect.